BNBTM - 43582, EPON RESIN 1001F

  • MSDS: BNBTM
  • Manufacturer: SHELL OIL CO
  • Product Name: 43582, EPON RESIN 1001F
  • National Stock Number: 8030-01-118-2794
Product Identification

Product ID:43582, EPON RESIN 1001F
MSDS Date:05/24/1989
FSC:8030
NIIN:01-118-2794
MSDS Number: BNBTM

Responsible Party
SHELL OIL CO
HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461;800-424-9300(CHEMTREC)

Info Phone: 713-241-4819

Preparer: G. A. VAN GELDER

Cage: SHELO

Contractor
SHELL OIL COMPANY
4320 HOUSTON, TX 77210 US

Telephone: 800-231-6950

Cage: 54527

Ingredients

BISPHENOL A EPOXY RESIN; (BISPHENOL A/EPICHLOROHYDRIN BASED

CAS: 25036-25-3

Fraction By Weight: 100%

OSHA PEL 15MG/M3 TDUST (MFR)

ACGIH TLV: 10MG/M3 TDUST (MFR)


RESIDUAL LEVELS OF ECH ARE CONTROLLED TO 1 PPM MAX

RTECS: 9999999ZZ


SURFACE WATERS. NOTIFY AUTH IF ANY EXPOSURE TO

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:LD50: (ORAL, RAT) 30 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HLTH EFTS ARE CONSISTENT W/REQ UNDER
OSHA HAZ COMMUNICATION STD (29 CFR 1910.1200). EYE CONT: DUST CAN
CAUSE MECH IRRIT. SKIN CONT: BASED ON PROD TESTING, PROD IS
MINIMALLY IRRIT. INHAL: DUST CAN CAUS E MECH IRRIT OF RESP
PASSAGES. INGEST: BASED ON PROD TESTING, PROD IS CONSIDERED TO HAVE
LOW ORDER OF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: ACUTE ORAL TOX. PROD WAS REPORTED TO
SHOW WEAK BUT REPRODUCIBLE MUTAGENIC ACTIVITY IN BACTERIAL ASSAY
IN ABSENCE OF METABOLIC ACTIVATION; ALSO TO INDUCE MIOTIC GENE
CONVERSION IN YEAST, CHR OMOSOMAL ABERRATIONS IN CULTURE RAT LIVER
CELLS, & NEOPLASTIC TRANSFORMATIONS IN BHK CELLS. ALL IN VIVO
ASSAYS WERE NEG.
Medical Cond Aggravated by Exposure:PREEXISTING EYE, SKIN, AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR A MINIMUM OF 15 MIN WHILE
HOLDING EYELIDS OPEN. GET MED ATTN. SKIN: REMOVE CONTAMD
CLTHG/SHOES & WIPE EXCESS FROM SKIN. FLUSH W/WATER. FOLLOW BY
WASHING W/SOAP & WATE R. IF IRRIT OCCURS, GET MED ATTN. DO NOT
REUSE CLTHG UNTIL CLEANED. INHAL: REMOVE TO FRESH AIR & PROVIDE O*2
IF BRTHG IS DFCLT. GET MED ATTN. INGEST: DO NOT INDUCE VOMIT. IN
GENERAL, NO (SUPP DATA)

Fire Fighting

Flash Point:>392F,>200C
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . MATERIAL WILL NOT BURN UNLESS PREHEATED.
COOL FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:EXPLOSIVE DUST CLOUDS MAY BE PRODUCED.

Accidental Release

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNIT. USE
CAUTIOUS JUDGEMENT WHEN CLEANING UP LG SPILLS. WEAR NIOSH/MSHA
APPRVD RESP/PROT CLTHG AS APPROP. SHOVEL/SWEEP UP/USE INDUS VACUUM
CLEANER. AVOID GENERATING DUS T CLOUDS. PUT INTO CONTRS FOR
RECLAIM/(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE W/ADEQUATE
VENTILATION. KEEP AWAY FROM OPEN FLAMES & HIGH TEMPERATURES.
Other Precautions:CONTAINERS, EVEN THOSE THAT HAVE BEEN EMPTIED, CAN
CONTAIN RESIDUES OF DUST OR SOLID PARTICULATES; THESE RESIDUES MAY
CREATE BOTH HEALTH & FIRE/ EXPLOSIVE HAZARDS. AVOID PRLNG/RPTD
BRTHG OF DUST & CON TACT W/SKIN. AVOID CONTACT W/EYES.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR AS REQUIRED
TO PREVENT OVEREXPOSURE. I/A/W 29 CFR 1910.134, USE EITHER A
NIOSH/MSHA APPROVED ATMOSPHERE-SUPPLYING RESPIRATOR OR
AIR-PURIFYING RESPIRATOR FOR PARTICUL ATES.
Ventilation:USE EXPLOSION-PROOF VENTILATION AS REQUIRED TO CONTROL
PARTICULATE CONCENTRATIONS.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS REQUIRED TO
MINIMIZE CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MATLS TO AVOID: BASES/ESPECIALLY PRIMARY & SECONDARY ALIPHATIC AMINES.
RXN W/SOME CURING AGENTS MAY PRDCE CONSIDERABLE HEAT. FIRST AID
PROC: TREATMENT IS NEC UNLESS LG QTYS OF PROD ARE INGESTED. HOWEV
ER, GET MED ADVICE. SPILL PROC: OR DISPOSAL. KEEP OUT OF SURFACE
WATERS/SEWERS/ WATERWAYS ENTERING OR LEADING TO (ING 2)

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:>50F,>10C
Spec Gravity:1.19 (H*2O=1)
Evaporation Rate & Reference:N/K (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER FLAKES.

Stability

Stability Indicator/Materials to Avoid:YES
CAN REACT VIGOROUSLY W/STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL
ACIDS, AND STRONG MINERAL & ORGANIC (SUPP DATA)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES AND ACIDS
MAY BE FORMED DURING COMBUSTION.

Disposal

Waste Disposal Methods:IF THIS PROD BECOMES A WASTE, IT WOULD NOT BE A
HAZ WASTE BY RCRA CRITERIA (40 CFR 261). PLACE IN AN APPROPRIATE
DISPOSAL FACILITY IN COMPLIANCE W/FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.